2. EL 7
  3. lldpad
  4. lldptool-med(8)

Scroll to navigation

lldptool(8) Linux lldptool(8)

NAME

LLDP-MED - Show / manipulate MED TLV configurations

SYNOPSIS

lldptool -t -i ethx -V [ TLV_TYPE ] enableTx

lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }

lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 | none }

lldptool -t -i ethx -V LLDP-MED devtype

TLV_TYPE : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev | medSerNum | medManuf | medModel | medAssetID }

DESCRIPTION

The LLDP-MED extensions support the Link Layer Discovery Protocol for Media Endpoint Devices defined in the ANSI/TIA-1057-2006 document. Each TLV can be configured as a class1 , class2 or class3 device. Class I devices are the most basic class of Endpoint Device, Class II devices support media stream capabilities and Class III devices directly support end users of the IP communication system. See ANS-TIA-1057 for clarification of class types.

ARGUMENTS

Enables the TLV to be transmitted
Set or query the class type of the device.

TLV_TYPE

List of supported TLV specifiers applicable to Media Endpoint Devices.

apply arguments to all supported MED TLVs.

LLDP-MED Capabilities TLV

LLDP-MED Network Policy TLV

LLDP-MED Location TLV

LLDP-MED Extended Power-via-MDI TLV

LLDP-MED Hardware Revision TLV

LLDP-MED Firmware Revision TLV

LLDP-MED Software Revision TLV

LLDP-MED Serial Number TLV

LLDP-MED Manufacturer Name TL

LLDP-MED Model Name TLV

LLDP-MED Asset ID TLV

EXAMPLE & USAGE

lldptool -T -i eth2 -V LLDP-MED enableTx=yes devtype=class1
lldptool -t -i eth2 -V LLDP-MED -c devtype
lldptool -t -i eth2 -V medPolicy -c enableTx

SOURCE

Link Layer Discovery Protocol for Media Endpoint Devices (http://www.tiaonline.org/standards/technology/voip/documents/ANSI-TIA-1057_final_for_publication.pdf)

NOTES

SEE ALSO

lldptool(8), lldpad(8)

AUTHOR

John Fastabend

June 2011 open-lldp